View Full Version : Small/Medium Glory Hole for sale in Central Ohio

Lawrence Tuber
10-21-2014, 07:59 PM
Glory Hole for Sale.
No combustion system attached.
This is in Columbus, Ohio - pickup preferred.

I made this small / medium size glory hole in 2004, used it briefly before I took it out of service and stored it it since then.
This is way more fuel efficient to use for making small objects than firing up a huge hole to make ornaments or cups.
The dimensions are as follows:
29" long measured from the front of the closed doors to the back of the drum.
22" wide overall
7" opening with doors closed
10" opening with doors open (retaining ring diameter)
13" Inside diameter of hole
22" Inside length from rear to retaining ring

The doors, retaining ring and floor are made of Kast-O-Lite 30 plus 2 1/2 inches thick.
the inside of the hole is made from Z-folded high temp fiber, accordion folded very tightly and treated with rigidizer. The back wall of the hole is 3" of high temp fiber rigidized.
The burner port is on the right side, 5" behind the retaining ring, it is 4 1/2 inches in diameter.
The photos show some dirt from storage in the back wall of the hole, it was stored vertically.

The hole was fired around 30 times.
The retaining ring and doors have radial cracks as seen in the photos - like most castings develop after firing, that in no way detracts from the performance of the equipment.
$1000.00 OBO