View Full Version : Eclipse manual shut off valve, BZR, etc

Eben Horton
01-02-2015, 12:12 PM
I have an eclipse shut off valve with manual reset handle ( retails new for around $2,000), a pyromics, inc 8-BZR ($400)
And an Antunes high/low pressure sensor ($200).
This was the safety system for a Hub MU 300 furnace that I have since rebuilt and no longer need it.

$1000.00 or best offer.

Brian Mazrim
01-04-2015, 11:13 AM
What size are the fittings on the shutoff valve?

Pete VanderLaan
01-04-2015, 11:18 AM
I have one with two inch female NPT thread and would sell the valve separately.

Brian Mazrim
01-04-2015, 11:41 AM
I have 1 1/2 inch pipe running through the shop that gets reduced down to 3/4 inch at the burner (this is for a glory hole with Alfred style burner). So I'd do best with 1 1/2 inch or smaller. I don't reall need the regulator right now, but I'll likely be building a second smaller GH later.

Pete VanderLaan
01-04-2015, 12:32 PM
They make these things called "Bushings".

Eben Horton
01-04-2015, 03:21 PM
It's 1 1/2"

Eben Horton
01-14-2015, 09:00 AM
This has been sold.

Pete VanderLaan
01-14-2015, 11:30 AM
Well, I have essentially the same thing except that it is plumbed for two inch NPT. I'll consider offers.