PDA

View Full Version : Essemce style Moldboy


Guy Corrie
11-03-2015, 08:57 PM
For Sale: Essemce Style Mold Boy and Burn-off machine

Pneumatic Mold boy, made in California. 48” long x 36” wide, with maximum platform height of 23”. This machine will accept a fairly large mould. It has been completely reconditioned: new pin, and actuator arm has been re-bored. Water pan has been powder-coated, frame and platform re-painted and all air lines have been replaced. 120 volt, operates at approximately 30 psi. The machine is as new. An additional cut- down attachment for necking is included but has not been re-conditioned. There are two additional time delay relays in panel for optional air cooling. The equivalent from Sweden sells for $5800: $2800, fob Richmond, CA.
Burn-off machine with 3 ring burners. This machine has not been reconditioned but is in excellent condition. It’s not marked, but believed to have been made by Manifold and Phalor. Oxy-Acetyline fired, 6 1/16”, 5 1/8”, 3 5/8” burners are included. These machines are rare, and virtually unheard of in studios: Lots of possibilities. $2500
We will palletize and can arrange for shipping.

Follow link for photos:

https://www.facebook.com/guy.corrie/posts/972858039438697?pnref=story[/URL]

Contact: 510-620-1100
guy@unionstreetglass.com