Moly element placement question

[Fredi Vilina]

Finally getting the moly furnace built with the elements I got from Steve a few years ago and it's been so long I can't remember where the taper on the element is supposed to go, inside the crown or down the below the crown. I remember it is important though and how much of the element should stick above the insulation for connection?
Thanks!
fredi

[Mick Owen]

I have a 300lb Stadelman. Everything to the left of the brick hangs inside the furnace. Here's how they are installed in my furnace.

[Steve Stadelman]

Place the taper just below the crown, slightly inside the chamber, get 2-3" above the passage brick, keep the heater 2" from anything inside the chamber for best results.

[Mick Owen]

whoops, didn't realize the file type and size limitations.

See the image here: http://www.lgman.com/molyelements.jpg