PDA

View Full Version : Entire shop of equipment for sale


Brian Gingras
04-03-2008, 05:51 AM
Below is the complete for sale listing for Simple Syrup in Brockton MA. If interested, go to www.simplesyrup.com

photos can be found here: http://www.flickr.com/gp/25233691@N05/k5q842


HOT SHOP :
Furnace HUB MU300 (2002) asking price $ 9,000.00
recuperator
combustion & safety
mold for casting front face
(needs approx. $3,100.00+ in repairs – HUB estimate)

Furnace Control Panel for MU300 (Control Point) asking price $ 5,000.00

Furnace HUB MU200 (1997) asking price $ 9,000.00
recuperator
combustion & safety
mold for casting front face
Furnace Control Panel for MU200 (included)


New LaClide Christy crucible, GC189 asking price $ 650.00


12” GH HUB (2002) asking price $ 5,000.00
combustion & safety


rolling yoke & track asking price $ 375.00

insulated heat shield asking price $ 195.00

reduction pedal
20” GH HUB (2002) asking price $ 6,250.00
combustion & safety

rolling yoke & track asking price $ 375.00

insulated heat shield asking price $ 195.00

Pipe Warmer HUB (1997) asking price $ 600.00
combustion & safety

1.5 MBTU Blower Spencer (2002) asking price $ 1,300.00

500 KBTU Blower Spencer (2002) asking price $ 1,325.00

Annealer FLA2 21.5 HUB (2002) asking price $ 3,500.00
door switches (cuts power to elements when doors are opened)
Partlow 1462 controller
(needs rebuild - HUB estimate $ 2,500.)

Annealer FLA2 30.5) HUB (2002) asking price $ 6,800.00
door switches (cuts power to elements when doors are opened)
Partlow 1462 controller
with steel shelf racks

Rolling Cart / Annealer Shelf Storage (SSGS) L29.5” x W24.5” x H33” asking price $ 400.00
holds 12 annealer shelves

10 - Annealer Shelves SSGS L25” x W22” x 1”, asking price $ 30.00 each
1” steel angle contruction w/ expanded metal bottom

2 - Marvers SSGS, L32” x W18” x H30” asking price $ 625.00 each
1” steel blanchard ground
steel tube base
5.5” casters

Black Work Bench – asking price $ 850.00

Red Work Bench asking price $ 850.00

Tractor Seat rolling Assistant’s chair asking price $ 85.00
2 sets of Jim Moore hand tools asking price $ 555.00 per set – OR;
8” jacks asking price $ 160.00 ea.
9” jacks asking price $ 168.00 ea.
small tweezers asking price $ 52.00 ea.
medium tweezers asking price $ 60.00 ea.
trim shears – 2” blade asking price $ 64.00 ea.
standard diamond shears asking price $ 72.00 ea.

New “Pick-Up Oven” - Paragon 11”dia x 9”depth 2005, asking price $ 1,150.00
GB1 Digitry Controller
includes rolling base

Oxy / Propane Torch, Ranger asking price $ 405.00
weldit gas saver
steel stand

Knock-Off Table SSGS L25.5” x W25.5” x H33” asking price $ 240.00
8” x 8” side “basket” for pail of water,
open storage underneath

Rolling Cart for Pick-ups SSGS L19” x W19” x H30” asking price $ 200.00
turning stand for Ferro
2 shelves for storage

Rolling Frit Cart SSGS L28” x W25” x H36” asking price $ 270.00
holds 8 12” x 6” x 2.5” hotel pans for use
2 shelves for storing an additional 16 pans
open bottom shelf for extra storage

10 - stainless 1/4 size, 2” deep, “hotel pans” w/ plastic lids asking price $9.00 each

Pipe crack-off rack with 2 aluminum pots asking price $ 125.00

Charging scoop – stainless steel asking price $ 200.00

Batch / Cullet Storage Barrel with custom dolly asking price $ 290.
00

Brian Gingras
05-04-2008, 02:33 PM
I visited them last week and they are anxious to deal and get things sold...the prices are only a starting point, if you really are interested in any of it, they are willing to negotiate.

Brian Gingras
11-26-2008, 05:23 AM
bumping up, still pretty much everything left, they are anxious to wheel and deal now.

David Patchen
11-26-2008, 01:12 PM
Sad to see another shop go down, but they should be willing to deal--those prices are kinda bizarre for used stuff.

Brian Gingras
11-26-2008, 02:33 PM
I know about the prices, yes they are willing to deal. They are not closing, they are drastically downsizing to a MUCH smaller location with a Stadelman electric furnace and 600SF, down from over 2500SF.

Pete VanderLaan
01-09-2015, 10:06 AM
I'm bringing this up to current for evalution. Anyne know how these prices were received? I would think them to be high by 50%.