PDA

View Full Version : Looking for Glory Hole

Mark Dolan
11-30-2009, 04:41 PM
I'm looking to buy a medium sized used Glory Hole (Propane) and Annealer (electric). I'm building a small home studio and will be a weekend warrior.

Thanks,

Mark
Drew Hine
11-30-2009, 05:18 PM
Hi I am selling a brand new glory hole. It is made with ifb's backed up with 2" of fiber frax. This hole was built to be a workhorse. The frame is made of 2" x 1/8" square tube with adjustable leveling feet. The steel barrel is made from 5/16" plate that was rolled to size and welded. It comes with a small pine ridge burner. The hole has a 12" overall opening. The heat ring is 1.5" all around. The useable opening is 9" The depth of the hole is 18". There is one set of doors with an opening of 6". This hole has been fired only once and will outlast most other studio equipment. I can send additional photos if you need
Asking $3,800 firm
The Glory hole for sale is pictured on the left
Drew Hine
412 889-0662
Glenn Randle
12-02-2009, 06:35 PM
I have an old one (55 gallon size) that I'm not using you can have for free. It's complete except would need a burner installed.
Glenn Randle
12-04-2009, 01:22 PM
Funny how nobody wants a free glory. I probably should ask $1500 obo and let them talk me down to $500.....

Whatever, I'll haul it to the dump sooner or later.
Drew Jaeger
12-07-2009, 08:03 AM
If it didn't take 36 hours round trip (according to the Google) and I had a place to store it I'd be all over it. Free is good!
Scott Novota
12-07-2009, 02:54 PM
Glenn is it worth crating and shipping?


Scott.
.
Carrie Blaskowski
12-07-2009, 04:33 PM
Is it complete except for the burner head? If nobody else speaks for it we may be interested. We are just a few hours away from Boone. Also, what is the opening size?

Thanks!
Carrie
Glenn Randle
12-08-2009, 05:20 PM
It's been spoken for, but I'll let you know if they change their mind.
Ben Rosenfield
12-23-2009, 12:30 PM
I'm looking to buy a medium sized used Glory Hole (Propane) and Annealer (electric). I'm building a small home studio and will be a weekend warrior.

Thanks,

Mark

Mark, I sent you an e-mail through CraftWeb just now.
Paul Hayworth
01-01-2010, 11:29 PM
http://www.hybeglas.com/data/English/default.asp

LOOK AT THIS COMPANYS WORKS