PDA

View Full Version : high temp blanket


Kenny Pieper
04-27-2012, 02:01 PM
I need to purchase some more high temp blanket. The best price that I have found so far is $634 for 2'x24"x25' from HNH this is it.

INSWOOL HTZ is a blanket used in higher temperature applications up to 2600F with low shrinkage characteristics. The product is made from a blend of Alumina, Silica and Zirconia.


Does anyone know of a better place.
I dont need this much either. Anyone want to split a roll?

Pete VanderLaan
04-27-2012, 02:10 PM
I would split some with you Kenny since I'm acquiring the stuff for the color class furnaces.. Did you try Tom at Hi Temp in Fenton Missouri. He might have that and his prices have always been very fair.

I'm out in California for a week for some family issues but I am checking craftweb.

Andrew Boatman
04-27-2012, 02:54 PM
We use Bryant Refractory up in Tulsa. http://www.bryantindustrial.com/ Not sure on pricing as it is not listed on their website.

Lawrence Duckworth
04-27-2012, 03:31 PM
Larkin Refractory in Atlanta. Great to work with too.

Kenny Pieper
04-27-2012, 04:18 PM
Larkin Refractory in Atlanta. Great to work with too.

Yea I forgot about Jim at Larcin. He is great as long as you know what you need and dont let him talk you into just what he has on hand. I saved a ton of $ when I built my shop going through him. Thanks larence for the reminder.

His price is $250 for 8# 2600 2'x24'x25

Pete if you want to split the role great!

I will call later with an order for a couple of pots.

Victor Chiarizia
04-29-2012, 07:02 AM
i could use some too kenny. vic

Josh Bernbaum
04-29-2012, 12:13 PM
I've only ever used the 1" thick rolls, and wondering if the price for that is any less (or more) than half of what the 2" costs?

Pete VanderLaan
04-29-2012, 01:14 PM
It sells by the board foot and also sells by the density, 4, 6, or 8 lb per cu ft.

Kenny Pieper
04-30-2012, 09:36 AM
So the best price I found was from high temp. (Thanks Pete) $78 for 2"x24"x12.5" 8 lb. 2600f.
I think I will keep the whole roll.

Pete VanderLaan
04-30-2012, 09:40 AM
Is that not for a 12.5 foot roll?

Kenny Pieper
04-30-2012, 10:09 AM
oops yes you are right it was for a 12.5' roll
I will try to chance that post so as not to confuse and have a deluge of calls going to hi temp.

Pete VanderLaan
04-30-2012, 11:29 AM
Great price. I like recommending Tom.