CraftWEB Hot Glass Talk

CraftWEB Hot Glass Talk (
-   General Hot Glass Discussion (
-   -   Well this is exciting news!! (

Pete VanderLaan 11-11-2019 09:56 AM

Well this is exciting news!!
I love hucksters:

Shawn Everette 11-11-2019 10:52 AM

Yeah I'm curious how they're turning "any" glass into "96".

John Riepma 11-11-2019 11:03 AM

All of the very bestest stuff is coming from Mexico!

Josh Bernbaum 11-11-2019 11:05 AM

I started reading and thought it was an interesting article and I enjoyed hearing more about their educational mission until the second I read that line about the "patented formula for transforming any glass into a 96"..
Yeah, gimme a break (so to speak)

Mark Rosenbaum 11-11-2019 11:20 AM

It's MAGIC!!!!

David Patchen 11-11-2019 11:26 AM

Of course this can't be correct, but I know some folks who use his additives with recycled glass and swear by them. Specifically the guys who run the shop at Soneva Fushi in the Maldives melt bottle glass and add Thornton's mix and they can combine the resulting clear with commercial color. They've hosted lots of top-tier artists at their studio and the finished work seems to be fine. I'm as shocked as anyone, and I'm sure the bottles have to be clear and from the same manufacturer or you'd end up with a cordy mess that's not even compatible with itself. But we should get someone who uses the additives to weigh in since it does seem impossible.

Pete VanderLaan 11-11-2019 11:58 AM


Originally Posted by David Patchen (Post 145862)
But we should get someone who uses the additives to weigh in since it does seem impossible.

Oh, I'm waiting.

I remember when Fritz used to pull people's legs with the recommendation that they add a can of "Seedz be gone", or "Cords Away" to cullet. he had to stop because people kept trying to buy it.

This seems more like Heidi Broderbund's "15 percent rule" for those who have long memories. That was the maximum amount of any glass you could just add to your work with no issues.

The best part of that "magic Mountain on the Austro/Czech border when the lead was harmlessly leached out of the cullet." Great stuff and then she named her cullet company "Czech Glass". Henry thought that was hysterical.

At one early time, we were adding soda ash to plate glass and getting it to where it wouldn't actually break things if you used Kugler with it. .

Credit for this alert goes to Scott Benefield.

Eben Horton 11-11-2019 01:48 PM

Um.... sounds like someone needs to do some mansplaining

Pete VanderLaan 11-11-2019 02:32 PM

It just gets me to whining again. When we added soda ash to the plate, finally it didn't break but that doesn't really mean a lot. I just didn't know much then. My concern now, particularly as I look to the Corning collection is glass that represents over 3000 years of process. Most stuff didn't make it but this did and it was simply because it was made without tons of stress and a lot of care. . If those old guys knew to travel to northern turkey from the Euphrates valley to find antimony, can't we do better?

David Patchen 11-11-2019 03:22 PM

Just talked to a former user of the magic powder. Here's what I learned:

1. The hotshop used only clear bottles for cullet, carefully removed labels, glue and crushed them.
2. They add 10% by weight of the flux/magic powder from Mexico to the cullet and bag it up.
3. Toss in bags and charge and fine out as usual

I would think that even using only clear glass would still result in a cordy mess since the different clears wouldn't homogenize nicely. But perhaps all the chear they used was from the same bottle factory so same formula? Dunno.

However, people who worked there said that the glass was consistently clear and cord-free, had nice working properties with good fit with commercial color. Tobias, Lino, Karen & Jasen, etc all used it with great results. It sounds unbelievable, but this is what I've heard directly from people who used and melted the stuff. Amazing.

Rich Samuel 11-11-2019 03:56 PM


Originally Posted by Mark Rosenbaum (Post 145861)
It's MAGIC!!!!

Or the mescal.

Pete VanderLaan 11-11-2019 04:20 PM

If, as you say, the bottles are all from the same facility ( Likely in Monterrey where there is a very modern factory for lead glasses), with an addition of flux with a good tank liner, yes, it's quite possible to make the clear workable and cord free.

That is a huge distance from the pictures showing all the cut offs with color attached in North Carolina. That part, I do not believe for an instant. That is just BS. .

David Patchen 11-11-2019 04:30 PM

What I was describing all goes down in the Maldives here:

Even more unlikely the clear comes from one factory.

John Riepma 11-11-2019 04:42 PM

The part that I found to be the most interesting was that the world is running out of silica and that it only comes from special beaches with a high percentage of silica in their sand. (NOT Short Mountain, that must be a diversionary ruse) I had read many years ago that the earth was 28% or so silica, so I looked it up again today and it's *still* listed as 28%.

This has to mean that for the percentage to remain the same over the past years that the world is getting smaller, which I've also heard.

The percentage of unobtanium will undoubtedly start going down though, once this catches on.

The interwebs is such a great place to get the information stuff. We're living in interesting times.

Pete VanderLaan 11-11-2019 06:22 PM

I think one of the obtuse portions of the article is exactly what you refer to.

All the glass is a 96 COE although all bottle glass is 83-85. The range on the bottles is accurate. The other? Pure BS. Sand is about 85% from nice beaches? Where could that come from?

As is frequently the situation with news, there's a shred of truth to the dramatic stuff that plays well. The reality is rather different.

How could one additive make everything mysteriously a 96 regardless of percentages? I had usually run with the number 95% for the silica. If John is right, I'm off. It is true that clean silica is being used in exorbitant quantities in fracking.

Rich Simmons 11-11-2019 06:33 PM


Originally Posted by David Patchen (Post 145868)
Just talked to a former user of the magic powder. Here's what I learned:

I would think that even using only clear glass would still result in a cordy mess since the different clears wouldn't homogenize nicely. But perhaps all the chear they used was from the same bottle factory so same formula? Dunno.

My old professor Cliff Sowder would disagree with you. Speaking from experience, as opposed to just conjecture. I've busted up plenty of beer, mayo, etc and never saw a cord. And, I must say Cliff made some of the best Carribean Blue I've ever seen. Yes, out of all sorts of bottles. Was this a panacea for perfect 96 with any glass, absolutely not but it is amazing what you can do. This was back in the late 70's too.

I've made a lot with this type of glass, done right, it's nice. The knowledge of how to manipulate the material is the trick, Patented Magic formula, Meh.

Josh Bernbaum 11-11-2019 08:56 PM

I'd pay top dollar for this mysterious pixie dust if I could sprinkle it on all of my color melts and have them magically fit my clear every time. Top dollar..

Eben Horton 11-11-2019 10:50 PM

You would think that if this studio owner has the ďwokeĒ reasoning to conserve silica due to a world silica shortage that they would just shut their furnace off to prevent adding CO2 to the atmosphere and help prevent climate change.

Sean Jones 11-12-2019 03:18 AM

When you apply for a patent you disclose all the details of the process. Thatís how you protect your invention. So, if itís patented we should be able to find the recipe.

Sky Campbell 11-12-2019 11:51 AM

I have visited the Olio and was as surprised to see that the glass quality seemed to be decent. Rebeccah is very nice and Iím sure she would be happy to answer anyoneís questions. The bottles are saved from the local bars and definitely not all the same. The labor to clean and remove labels would be enough for me to find another source of cullet but they have plenty of free labor through the programs they offer. Iím also in the same thinking snake oil and even if it works for them it doesnít mean it would work for someone else. Obviously glass can be modified to fit but one magic potion wonít fix all glasses. I choose not to spend anytime thinking of the claims of the idea that glass needs to be recycled. It isnít a pollutant in clear form and I always thought the only responsible way to recycle glass is reuse.

Iím curious Is this magic potion available through any US distributors now?

Pete VanderLaan 11-12-2019 12:56 PM

I've been talking to the manufacturers but so far, I would say No.

Melting bottles down is not particulary attractive anymore since there are so many different formulations. Here, it gets crushed and become aggregate for a variety of products. Glass manufacturers do recycle their own cullet from the gob feeders.

Shawn Everette 11-12-2019 03:11 PM

Kugler method? Add lead until it's just compatible enough?

Pete VanderLaan 11-12-2019 05:26 PM

No, lead won't pass muster in US manufacturing. Soda will do but it makes dull glass. Potassium would do better. We'll see what we see.

Eben Horton 11-12-2019 06:54 PM

I tried searching for a patent and found nothing.

Michael Ahlefeldt-Laurvig 11-12-2019 07:10 PM

We have strict mandatory recycling rules in Sweden, metal, paper, plastic and glass, Ive tried to find out about the glass, and its not easy. The answers vary from actually being recycled to new bottles etc to being an additive in asphalt, or being used for making house insulation, although I’m
not entirely convinced

All times are GMT -5. The time now is 04:41 AM.

Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
© Opportunity Network. 2008. All Rights Reserved.