CraftWEB Hot Glass Talk

CraftWEB Hot Glass Talk (http://talk.craftweb.com/index.php)
-   General Hot Glass Discussion (http://talk.craftweb.com/forumdisplay.php?f=4)
-   -   Tom Philabaum (http://talk.craftweb.com/showthread.php?t=12701)

Kenny Pieper 10-12-2020 11:53 AM

Tom Philabaum
 
Here is a nice artical on Tom Philabaum
https://tucson.com/entertainment/tuc...5918e5519.html

Pete VanderLaan 10-12-2020 01:46 PM

you really scared me with that headline Kenny!

Did you resolve the blown breaker?

Kenny Pieper 10-13-2020 10:25 AM

Not yet I think I'm going to have to send in my SCR to have it recalabrated

Eben Horton 10-13-2020 07:54 PM

Quote:

Originally Posted by Pete VanderLaan (Post 149063)
you really scared me with that headline Kenny!

Did you resolve the blown breaker?

“Awe shit.. he croaked or his PM’s box is full”

Kenny Pieper 10-14-2020 01:00 PM

Quote:

Originally Posted by Eben Horton (Post 149069)
“Awe shit.. he croaked or his PM’s box is full”

Nope neither.

It turned out to be a contactor that sometimes when it closed was creating some sort of surge or short. Also the SCR is out of calibration so if I set the current limit say at 95 its letting 126amp through. For the time being I just lowered the current limit further down. When I shut down next I may send it in to have it calibrated.


All times are GMT -5. The time now is 02:53 AM.

Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
© CraftWEB.com. Opportunity Network. 2008. All Rights Reserved.