Thread: Gb5 question
View Single Post
  #7  
Old 01-17-2020, 07:10 AM
Pete VanderLaan's Avatar
Pete VanderLaan Pete VanderLaan is offline
The Old Gaffer
 
Join Date: Apr 2002
Location: Chocorua New Hampshire
Posts: 21,956
Pete VanderLaan is on a distinguished road
Call Dr Glass.

If you have a multi meter, check to establish that you have power to the relay overseeing the elements. If there is power there, check the other side of it as to power out to the element. Also check continuity in the relay itself. Then check continuity in the element itself, assuming you only have one. Also check to see if the controller is in fact making a call to activate the relay. That's the two input wires coming from the controller. IF all else fails, Call Eben and he'll tell you how great Digitry is.

I don't think it's the thermocouple or its connections or the readout would be all over the map. Motherboards? that should be born out with the power check I've already mentioned.
__________________
Where are we going and why am I in this basket?
Reply With Quote