View Single Post
Old 03-20-2011, 11:47 PM
Dennis Hetland Dennis Hetland is offline
Registered User
Join Date: Sep 2009
Location: Salem, OR
Posts: 304
Dennis Hetland is an unknown quantity at this point
This appears to be a 4to1/2to1 step down transformer. You're not showing the entire nameplate There's more info on it, like the KVA.
I can't be 1000% positive, but I'm assuming this is rated for 480v on the primary. If you have a 240v service going to your primary and you wire X1 to X3 and X2 to X4 you should get 60v out of your secondary.
The 1 through 6 on the primary are taps for adjusting to high or low voltage coming from your service. Like if you're supposed to have a 480v service, but you're actually getting 500v you can tap it so your secondary is putting out the proper voltage. You could play with those taps to get slightly more or less than 60 volts. If you wanted to for some reason.
You should post another picture that shows the entire nameplate.
Reply With Quote