|
|
#1
04-13-2002, 07:19 PM
|
||||
|
||||
|
Furnaces, Glory Holes , Burners
Correll Glass Studio
Charlie Correll 66 Hidden Ledge Conway MA 01341 413-369-4283 413-369-4283 fax www.correllglass.com ccorrell@crocker,com Charlie is a warhorse in Glass and an old friend. He builds very nice furnaces and has tinkered with recuperation systems for years. I like what he puts together and a lot of other people must as well since frequently when I sell a crucible, more often than not, it is for one of Charlies' units. They are all over the northeast US. Check it out. *************************** Denver Glass Machinery 2800 South Shoshone St Englewood Co 80110 303-0980 303-781-9067 fax www.denverglass.com info@denverglass.com These guys build Kanthal wire element furnaces. They are the most inexpensive thing out there I think although Thumb may have them beat. I don't like wire element furnaces since the elements don't last very long. Their replacement elements are expensive and are better purchased from Duralite Inc Their replacement crucibles are better replaced by Engineered Ceramics ( moi!) There are people who absolutely love these things and get very frosty when I pan them. I respect them and don't get it. So, they sell a lot of them every year so they must be doing something right. So if you need a glass furnace that sells for about four Grand, give them a call. It's instant gratification. I just can't get excited. As for the other equipment, I have looked at it but never used it. Maybe someone can give their polishing stuff a product review? *************************** Hub 690 Route 73 Orwell Vt 05161 802-948 2209 802-9482217 fax www.hubglass.com info@www.hubglass.com HUB builds beautiful equipment. Every thing they do is excellent. Corning actually calls HUB when they want furnaces built. HUB will rent you his forms for casting furnaces if you don't have the cash for the completed product. Great stuff. ********************** Pine Ridge Enterprises P.O. Box 121 Paradise CA 95967 Tom Ash 530-877-9793 http://www.prburner.com/ sales@prburner.com This is the guy who makes the burner that I won't explain to anyone how they are made. You gotta buy one from Tom and cut it up. ( then buy another one when you find out how much trouble you just got into). They are very quiet, sturdy ribbon burners. I like them. For furnaces and gloryholes. Support small businesses. ********************* Wet Dog Glass 504-286-9529 504-283-9234 FAX www.@wetdogglass.com hotstuff@wetdogglass.com Eddie Bernard Manufacturers of tank furnaces, pot and invested pot furnaces, gloryholes, pipe warmers. garages, yokes and other stuff. Also handles flame safety equipment. I have not ever dealt with these guys and would welcome a review. ************************ Abell Combustion Custom designed combustion systems. Control and Safety systems for furnaces and Gloryholes. www.abellcombustion.com ************************ 
|
|
#2
05-31-2002, 10:28 PM
|
|||
|
|||
|
Wet Dog Glass
504-286-9529 504-283-9234 FAX www.hotstuff@wetdogglass.com hotstuff@wetdogglass.com Eddie Bernard Manufacturers of tank furnaces, pot and invested pot furnaces, gloryholes, pipe warmers. garages, yokes and other stuff. Also handles flame safety equipment. I have not ever dealt with these guys and would welcome a review. Wet dog is great. Eddie has worked with Fred Metz of Spiral Arts for a few years now. He is an amazing fabricator, and it shows in the equipment he makes. He's also the Shop tech at New Orleans School of Glass. The correct web aderess is.... www.wetdogglass.com eben
|
|
#3
06-01-2002, 12:15 AM
|
|||
|
|||
|
Eben is right. Eddie builds first rate equipment. I have been doing business with him on and off for several years. When Fred quit making the "Spiral Arts" retention tip, Eddie took over production (with Fred's blessing).
I recently had a chance to visit with Eddie and his wife at their new shop (in New Orleans). They are great people. If you need expertise in putting together a hot shop in a school or other public setting, Eddie is your man. He is expert in all the safety stuff that will make the "powers that be" happy. (Besides the NO School of Glass, Eddie has also done a lot of work at Tulane University, which, buy the way, has a great hot shop). I can't say enough good stuff about Eddie. Tom A Last edited by Tom Ash; 06-04-2002 at 11:43 PM.
|
|
#4
06-05-2002, 09:58 AM
|
||||
|
||||
|
Evenheat curcible kilns and annealers
I have been using an Evenheat 1413 curcible kiln for over a year melting glass in a 38# EC crucible. it works great, and runs off of 15 Amps at 220/240 volt. I also have the GT22, which is a front loading annealer from Evenheat. Both kilns are equipped with Rampmaster II digital controlers.
For more information, follow the link to their web site. http://www.evenheat-kiln.com/ Last edited by Mark Wilson; 06-05-2002 at 10:04 AM.
|
|
#5
01-15-2003, 02:28 PM
|
||||
|
||||
|
Refractories
Hi Temp
2250 North Clark Fenton MO 63026 Phone 636-677-2200 FAX 636-677-2235 Tom Home of Morcocast refractories. Tom sells all sorts of stuff and specializes in buying out end runs when large furnaces are being built. His soft brick prices can't be beat on IFB26 and 28's. My favorite thing he sells is Morcocast 95, a 95% alumina castable made up fresh locally in very small quantities. It runs about 65 cents a lb which also makes it very inexpensive. I am about to try the Morocast 99 and will report back.
|
|
#6
02-07-2003, 01:01 AM
|
|||
|
|||
|
Re: Furnaces, Glory Holes , Burners
Quote:
The two larger units don't have near the problems associated with element life. 9 months is not unusual. I recommend using the elements for the 200 lb unit in the 130 lb unit and sizing up the relay and the service at the panel. This will result in quicker melts, and temp rebounds after squeezing or idling. If I start charging at 3:00 p.m., I am finished by about midnight, ready to blow the next day.
|
|
#7
10-24-2004, 01:33 PM
|
|||
|
|||
|
Re: Re: Furnaces, Glory Holes , Burners
Quote:
I blew a little with these furnaces and my major gripe was the combination door position and radiant heat blasting at you. Seems like it was a hot gather compared to the other furnaces I've used. I agree though that the price combined with instant gratification is tempting. Donovan
|
|
#8
05-24-2005, 02:14 PM
|
|||
|
|||
|
Refractories
For those of you on the north east coast who need castables including Kast-o-lite 30 and Mizzou.
Refractory Maintenence Corperation, 4524, Rt 104, Williamson, Ny, 14589 No website. Ph# 315-589-4441 Kast-o-lite 30 is $31.35 a 55" bag Mizzou is $29.15 a 55# bag. Jay.
|
|
#9
05-24-2005, 02:31 PM
|
|||
|
|||
|
Just for a comparison, I just paid $28.00 for 55 lb bags of Mizzou at Hi Temp... However, I'm sure that $1.15 can easily be saved in shipping if you are closer to Jay's resource.
Donovan
|
|
#10
05-26-2005, 09:15 PM
|
|||
|
|||
|
Quote:
For me it's great because it only takes me about 45 min to get there so no shipping. Jay.
|
|
#12
06-22-2012, 11:11 PM
|
|||
|
|||
|
Hi Pete. There's a new technology for glass blowing, instead of recuperation I opted for heat exchangers in cascade fashion to use all the heat. 6 pieces of gear from 1. 11/2" burner & 20 amps.
http://www.pozible.com/index.php/archive/index/5706 Website coming soon, these are a DIY build, with online support.
|
|
#13
06-26-2012, 06:48 PM
|
||||
|
||||
|
Quote:
I would note here that this post is the only one in the thread which is recommended by the guy who made the equipment. The other posts are all recommendations from actual users of the equipment recommended. To me, that's worth noticing.
__________________
Where are we going and why am I in this basket?
|
|
#14
05-05-2018, 07:48 AM
|
|||
|
|||
|
Mobile Glassblowing Studios
I think these guys deserve a mention here. Chuck and Pete run the show at Mobile Glassblowing Studios making a great range of small 'Dragon' furnaces, as well as some light duty ovens and other kit for the glass nomad. I've been running their Little Dragon furnace for over a year and have no complaints with it. Check out their full line at http://www.mobileglassblowingstudios.com/
|
|
#15
05-05-2018, 01:20 PM
|
||||
|
||||
|
Quote:
__________________
Temperature and time.
|
|
#16
05-05-2018, 04:52 PM
|
||||
|
||||
|
I am always happy to see good equipment placed in the spotlight here. Beware of trying to con anyone though. More than a few Charlatans have seen the downside of making wild claims.
What we need is solid engineering, good welds, fair prices and a help line. I like to see equipment that has been in service at least one year with references from actual users. I've continually heard good things about mobile glass studios.
__________________
Where are we going and why am I in this basket?
|
|
#17
01-13-2020, 10:28 AM
|
||||
|
||||
|
Correll Glass
The link to Charlie Correll's website is incorrect. It should be www.correllglassstudio.com
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
